FIAT Panda Classic - Manual (Page 132)

❒ fasten bolts completely, working in a
criss-cross fashion as shown in fig. 8.
REFITTING THE STANDARD
WHEEL
❒ Following the above procedure, raise
the car and remove the space saver
wheel;
❒ make sure the contact surfaces be-
tween wheel and hub are clean so that
the fastening bolts will not come loose;
❒ fit the standard wheel by inserting the
first bolt L-fig. 9 in the hole next to the
inflation valve;
❒ fit the wheel cap making the symbol C
coincide with the inflation valve and the
bolt previously fastened to the hole M-
fig. 9/a;
❒ fit the spare wheel making pin N-fig.
7 coincide with one of the wheel holes
O;
❒ fasten the four fastening bolts;
❒ turn the jack handle to lower the car
and remove the jack;
fig. 7 F0G0204m fig. 8 F0G0206m
fig. 9/a F0G0603m
130
W
ARNING
LIGHTS AND MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICA
TIONS
IINDEX
DASHBOARD AND CONTROLS
SAFETY DEVICES
CORRECT USE OF THE CAR
IN AN
EMERGENCY
fig. 9 F0G0233m