Power supply, Note, Battery placement – Sliprobot L1 User Manual

Page 6: Sharpening machine, Profile stone, Battery cables, Profile template (transport support)), Grinding wheel 150 x 4 x 16, Allen key, Grinding wheel guard

Text mode
Original mode

POWER SUPPLY

In order to obtain the best result the machine should be connected to a car
battery 12 volt (max 12-14 volt, min 9 ampere).

NOTE:
Battery placement.
Make sure that the battery terminals are connected to the correct poles
of the battery.
Position the battery so that sparks from the sharpening machine cannot
reach it.

1. Sharpening machine

6. Profile stone

2. Battery cables

7. Profile template (transport
support))

3. Grinding wheel 150 x 4 x 16:

8. Allen key

4. Grinding wheel 150 x 4 x 16:

9. Grinding wheel guard:

5. Stop clamp

10. Self-tapping screw x 2
11. Sprocket weight