Safety regulations, The site must be well lit, Always wear safety gloves and safety goggles – Sliprobot L1 User Manual
Page 5: Always check the condition of the grinding wheels, Motor data - sliprobot l1, Grinding motor, Voltage: 12 volts, Rotation speed: 2800 r/min, Peripheral speed: 22 m/s, Power: 90 watts
5
SAFETY REGULATIONS
Locate the machine where it is not exposed to rain or moisture.
The site must be well lit.
The machine must not be located close to gas, liquids or other materials that
might catch fire or explode.
Only a service technician is permitted to carry out work on the machine.
To avoid mistakes when sharpening chainsaw chains, it is extremely
important to understand how the sharpening machine works.
Read the instruction manual carefully before doing any sharpening with the
machine.
Always wear safety gloves and safety goggles.
Always check the condition of the grinding wheels.
Cracked, vibrating or wobbling grinding wheels must be discarded.
To avoid breakdowns, clean the machine to remove grinding dust.
MOTOR DATA - Sliprobot L1
Grinding motor
Voltage: 12 volts
Rotation speed: 2800 rpm
Peripheral speed: 22 m/s (72ft/s)
Power: 90 watts
Current: 7.5 A
Grinding wheel: 150 x 4 x 16 mm
Overcurrent protection: Miniature circuit-breaker type ptc
Machine: 9 kg (20 lb)
Machine dimensions: L370 x W300 x H350 mm
Working voltage: Min 12 V, max 14 V