beautypg.com

Installing the sharpening machine, Install the machine on a bench or stand, Note – Sliprobot L1 User Manual

Page 8: The machine must be securely fixed. 1, About 1-5 mm outside at the front edge. 2, Power supply, Connect the red cable to + and the black to, Cutting angle, Grinding angle, The cutting angle can be varied between 90

Installing the sharpening machine, Install the machine on a bench or stand, Note | The machine must be securely fixed. 1, About 1-5 mm outside at the front edge. 2, Power supply, Connect the red cable to + and the black to, Cutting angle, Grinding angle, The cutting angle can be varied between 90 | Sliprobot L1 User Manual | Page 8 / 20 Installing the sharpening machine, Install the machine on a bench or stand, Note | The machine must be securely fixed. 1, About 1-5 mm outside at the front edge. 2, Power supply, Connect the red cable to + and the black to, Cutting angle, Grinding angle, The cutting angle can be varied between 90 | Sliprobot L1 User Manual | Page 8 / 20