Rear brake lever, Instrument and control functions – Yamaha YJ125T User Manual
Page 21
3-4
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
EAU32430
Recommended fuel:
REGULAR UNLEADED GASO-
LINE ONLY
Fuel tank capacity:
4.5 L (1.18 US gal) (0.98 Imp.gal)
Your Yamaha engine has been designed
to use regular unleaded gasoline with a
pump octane number [(R+M)/2] of 86 or
higher, or a research octane number of
91 or higher. If knocking (or pinging) oc-
curs, use a gasoline of a different brand
or a gasoline or premium unleaded fuel.
Use of unleaded fuel will extend spark
plug life and reduce maintenance cost.
Gasohol
There are two types of gasohol: gaso-
hol containing ethanol and that contain-
ing methanol. Gasohol containing etha-
nol can be used if ethanol content does
not exceed 10%. Gasohol containing
methanol is not recommended by
Yamaha because it can cause damage
to the fuel system or vehicle perfor-
mance problems.
EAU32481
Fuel tank cap
1
2
ZAUM00**
1. Fuel tank cap cover
2. Match mark
To remove the fuel tank cap
Slide the lock cover open, insert the key
into the lock, and then turn it 1/4 turn
clockwise. The lock will be released and
the fuel tank cap can be removed.
To install the fuel tank cap
1. Insert the fuel tank cap into the tank
opening with the key inserted in the
lock and with the marks on the cap
and tank aligned.
2. Turn the key counterclockwise to
the original position, remove it, and
then close the lock cover.
EAU12950
Rear brake lever
1
ZAUM00**
1. Rear brake lever
The rear brake lever is located on the
left handlebar grip. To apply the rear
brake, pull this lever toward the handle-
bar grip.
5YR-F8199-11ch3.pmd
2004/06/11, 14:12
4