Yamaha YJ125T - Manual (Page 19)

3-2
1
2
3
4
5
6
7
8
9
INSTRUMENT AND CONTROL FUNCTIONS
EAU10980
Indicator lights
EAU11020
Turn signal indicator light “ 5 5 5 5 5”
This indicator light flashes when the turn
signal switch is pushed to the left or right.
0
1
2
10
MPH
20
30
40
50
60
70
80 0
20
40
60 80
100
120
ZAUM00**
1. High beam indicator light ”&”
2. Turn indicator light “5”
EAU11080
High beam indicator light “ & & & & &”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU12660
Engine stop switch “ # # # # #/$ $ $ $ $”
Set this switch to “#” before starting
the engine. Set this switch to “$” to stop
the engine in case of an emergency, such
as when the motorcycle overturns or
when the throttle cable is stuck.
1
2
ZAUM00**
1. Engine stop switch “#/$“
2. Start switch “,”
EAU12700
Start switch “ , , , , ,”
Push this switch while applying the front
or rear brake to crank the engine with
the starter.
ECA10050
c C
See page 5-1 for starting instructions
prior to starting the engine.
EAU12342
Handlebar switches
EAU12400
Dimmer switch “ % % % % %/& & & & &”
Set this switch to “&” for the high beam
and to “%” for the low beam.
1
2
3
ZAUM00**
1. Dimmer switch “%/&“
2. Turn signal switch “4/6”
3. Horn switch “*”
EAU12460
Turn signal switch “ 4 4 4 4 4/6 6 6 6 6”
To signal a right-hand turn, push this
switch to “4”. To signal a left-hand turn,
push this switch to “6”. When released,
the switch returns to the center position.
To cancel the turn signal lights, push the
switch in after it has returned to the cen-
ter position.
EAU12500
Horn switch “ * * * * *”
Press this switch to sound the horn.
5YR-F8199-11ch3.pmd 2004/06/11, 14:12 2