Yamaha PDM-1 - Manual (Page 36)

36
Select SIGNAL from the “SET UP” menu during RGB or PC input signal mode.
Press to adjust.
SIGNAL [ PC ]
SYNC
H-FREQ. kHz
V-FREQ. Hz
H & V
31.5
60.0
SYNC
SYNC H & V
SYNC ON VIDEO
SYNC ON G
Setting RGB sync signal
Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT).
H & V: The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
ON VIDEO: The composite video signal input from the VIDEO input terminal is
used by dividing the sync signals.
Setting PC sync signal
Confirm that the input is set to PC INPUT (this setting is valid only for PC INPUT).
H & V: The H and V sync signals are input from the HD/VD connector.
ON G: Uses a synchronized signal on the Video G signal, which is input from
the G connector.
Displays the H (Horizontal)/V (Vertical) frequencies.
This display is valid only for RGB input and PC input.
Display range:
Horizontal 15.6 - 110 kHz
Vertical 48 - 120 Hz
H-FREQ (kHz)/V-FREQ (Hz)
H-FREQ. kHz
V-FREQ. Hz 31.5
60.0
SET UP for Input Signals
SIGNAL [ RGB ]
SYNC
H-FREQ. kHz
V-FREQ. Hz
H & V
31.5
60.0
SET UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
OSD LANGUAGE ENGLISH (US)
SET UP TIMER
Press to exit from adjust mode.
R
Press (ACTION) button
SYNC H & V
SYNC ON G