Yamaha PDM-1 - Manual (Page 32)

32
SCREENSAVER
(For preventing after-images)
2
3
1
4
SET UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
OSD LANGUAGE ENGLISH (US)
SET UP TIMER
0:00
0:00
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
INTERVAL
SHOW DURATION
SIDE BAR ADJUST BRIGHT
SAVER DURATION
Press to display the SETUP menu screen.
SET UP
Press to select the SCREENSAVER.
Press to select the SCREENSAVER screen.
Press to select the Function.
Press to select the desired function.
WHITE BARSCROLL : A white bar will scroll from left to right.
NEGATIVE : A negative image will be displayed on the screen.
Press to select the MODE.
Press to select ON or OFF.
Do not display a still picture, especially in 4:3 mode, for any length of time.
If the display must remain on, a SCREENSAVER should be used.
MODE selection
NEGATIVE / SCROLL selection
If the MODE is at ON, the menu screen will disappear and the SCREENSAVER will be activated.
After selecting TIME OF DAY or INTERVAL, the relevant SET UP TIME will become available for selection and the
OPERATING TIME may be set. (Time cannot be set when “MODE” is “ON” or “OFF.”)
0:00
0:00
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
OFF
SIDE BAR ADJUST HIGH
SHOW DURATION
SAVER DURATION 0:00
0:00
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
INTERVAL
SHOW DURATION
SIDE BAR ADJUST HIGH
SAVER DURATION
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
TIME OF DAY
START TIME 0:00
0:00
SIDE BAR ADJUST MID
FINISH TIME
WHITE BAR SCROLL NEGATIVE
TIME OF DAY : Operates when START TIME and FINISH TIME are set up and those
times arrive.
INTERVAL : Operates when SHOW DURATION and SAVER DURATION are set
up and those times arrive.
ON : Operates when the (ACTION) is pressed.
To stop the SCREENSAVER under ON, press the
R
button.
OFF
SCREENSAVER
FUNCTION
MODE WHITE BAR SCROLL
TIME OF DAY
START TIME 0:00
0:00
SIDE BAR ADJUST MID
FINISH TIME