Xilinx LogiCore PCI v3.0 - Manual (Page 44)

44 www.xilinx.com PCI v3.0.151 Getting Started Guide
UG157 August 31, 2005
Chapter 5: Synthesizing a Design R
4. To add source files to the new project, click Add. The first file (used by any design that
instantiates Xilinx primitives) is located in:
/lib/xilinx
5. Navigate to the virtex.v file; then click Add to move this source file into the Files To
Add list.
Figure 5-6: Main Project Window
Figure 5-7: Select Files to Add (Library)