Yamaha YSP-500 - Manual (Page 54)

52
En
Playing back sound clearly (My Beam)
You can adjust the beam angle manually while playing
back an input source. This function is also ideal if the
listening position is out of the operation guarantee range
of the auto-adjust function.
1
Set the operation mode selector to YSP.
2
Press MY BEAM.
“MY BEAM” is displayed in the front panel display.
3
Press / while “MY BEAM” is displayed to
adjust the beam angle.
Control range: L90° to R90°
• Press repeatedly to increase the horizontal angle
on the left side.
• Press repeatedly to increase the horizontal angle
on the right side.
4
Press MY BEAM again to complete the beam
angle adjustment.
Using manual-adjust function
YSP
TV/AV
5
MY BEAM
ENTER
A N G L E 0