ZyXEL Communications SMG-700 - Manual (Page 48)

Chapter 4 Station Mode
NWD-270N User’s Guide
48
4.4.1 Security Settings
When you configure the NWD-270N to connect to a network with wireless security activated
and the security settings are disabled on the NWD-270N, the screen varies according to the
encryption method used by the selected network.
4.4.1.1 Security Type Selection
When you choose to connect to a network that has security, you are presented with is a security
selection screen. Choose the security of the network you are attempting to join.
Figure 32 Security Setting Selection
The following table describes the labels in this screen.
4.4.1.2 WEP Encryption
Configure WEP security in this screen.
Figure 33 Security Setting: WEP
Table 8 Security Setting: WEP
LABEL DESCRIPTION
Security Type Select the security type that matches the security setting of the network you’re
trying to join.
The options are: WEP, WPA, WPA2, WPA-PSK, WPA2-PSK, and 802.1x.
Back Click Back to go to the Site Survey screen to select and connect to another
network.
Next Click Next to confirm your selections and advance to the Security Settings
screen that corresponds to the one you select here.
Exit Click Exit to return to the Site Survey screen without saving.