Yamaha LF225 - Manual (Page 53)

Operation
47
CAUTION:
ECM00250
Be sure to retract the trim rods completely
during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU28055
Procedure for tilting down (power trim
and tilt models / power tilt models)
1. Push the power trim and tilt switch / pow-
er tilt switch “
” (up) until the outboard
motor is supported by the tilt rod and the
tilt support lever / tilt support knob be-
comes free.
2. Release the tilt support lever or pull out
the tilt support knob.
3. Push the power trim and tilt switch / pow-
er tilt switch “
” (down) to lower the out-
board motor to the desired position.
EMU28060
Cruising in shallow water
The outboard motor can be tilted up partially
to allow operation in shallow water.
EMU30710
Power trim and tilt models / power tilt
models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ZMU01884
ZMU01885
DN
ZMU01936
UP
DN
ZMU04603
DN
U69J17E0.book Page 47 Tuesday, March 7, 2006 10:00 AM