Yamaha LF225 - Manual (Page 34)

Basic components
28
NOTE:
The tachometer unit shows various kinds of
information according to the setting made us-
ing the “
” (set) and “ ” (mode) buttons.
For details, see the attached operation manu-
al.
Preoperation checks
Place the gear shift lever in neutral and turn
the main switch to “
” (on). After all the dis-
plays come on and the total hour display
comes on, the gauge will change to normal
operation. If the buzzer sounds and the water
separator warning indicator blinks, consult
your Yamaha dealer immediately.
NOTE:
To stop the buzzer, press the “ ” (set) or
“ ” (mode) button.
Low oil pressure warning
When the engine oil pressure drops too low,
the low oil pressure warning indicator will start
to blink, and the engine speed will automati-
cally decrease to about 2000 r/min.
Stop the engine immediately if the buzzer
sounds and the low oil pressure warning indi-
cator blinks. Check the engine oil quantity and
replenish oil if necessary. If the warning de-
6. Water detection warning indicator
7. Battery voltage
8. Oil pressure (4-stroke models)
1. Set button
2. Mode button
1. Tachometer
2. Trim meter
3. Multifunction display
4. Water detection warning indicator
5. Engine trouble warning/maintenance indica-
tor
6. Cooling water pressure
7. Oil pressure (4-stroke models)
8. Cooling water/engine temperature
9. Battery voltage
2 1
ZMU05417
1 4 5 2
3
6 8 7 9 ZMU05418
ZMU05430
ZMU05431
U69J17E0.book Page 28 Tuesday, March 7, 2006 10:00 AM