Yamaha Pocket Recorder - Manual (Page 48)

Using the Timer Functions
POCKETRAK CX Reference Manual
48
6.
Press the [STOP/ESC ] button twice.
The recorder displays the main screen.
Note:
· The crossed-out timer indicator ( ) means that Timer recording is unavailable due to
one of the following reasons:
- There is no available recording time.
- The specified folder contains 199 files.
- The unit is currently playing back.
- The unit is currently recording.
- You are currently setting menu items.
· To remove the timer indicator ( ), cancel the programmed Timer recording.
· Timer recording will be cancelled once the programmed Timer recording has been exe-
cuted.
· You cannot program Timer recording if the alarm has already been programmed, and
vice versa.
■
Canceling Timer recording
Select [CANCEL] as in step 2 of the “Programming Timer
recording” procedure, then press the [MENU/ENTER]
button.
Programming the alarm
If you program the alarm, it will sound at the specified time. You can specify your favorite song as
the alarm sound instead of a beep. Before you proceed, make sure that the date and time on the
unit have been set correctly (see
page 9 ).
1. Press the [MENU/ENTER] button for at least two
(2) seconds while the main screen is displayed,
press the [VOL +/-] buttons to select [COMMON
MENU]
→ [TIMER & ALARM], then press the
[MENU/ENTER] button.
2.
Press the [VOL +/-] buttons to select [ALARM],
then press the [MENU/ENTER] button.
The recorder displays the alarm indicator.
Alarm indicator