Yamaha Pocket Recorder - Manual (Page 14)

Recording
POCKETRAK CX Reference Manual
14
2.
Press the [REC/PAUSE ] button.
The LED lights up in red and recording begins.
Hint:
· If the recording level is too high (see page 12 ), set
the [MIC SENS] (microphone sensitivity) switch to
[LOW].
3.
Press the [STOP/ESC ] button to stop recording.
The LED will turn off and the REC REMAIN TIME indicator will be displayed on the
screen.
Recording from an external audio device (such as a CD
player)
You can record line input sources from an external audio device (such as a CD player or MD
player).
1. Press the [MENU/ENTER] button for at least two (2) seconds while the main
screen is displayed, press the [VOL +/-] buttons to select [REC MENU]
→
[REC SELECT], then press the [MENU/ENTER] button.
2. Press the [VOL +/-] buttons to select [LINE], then press the [MENU/ENTER]
button.
Note:
· Please note that you cannot adjust the recording level on the unit if [LINE] has been
selected.
3.
Connect the recorder’s [MIC/LINE] socket to the audio output connector on
the external device.
VOL
MENU
ENTER
SPEED PAUSE ESC
PLAY STOP REC
MIC
SENS
HIGH
LOW
MENU
ENTER
VOL