Yamaha VA2 - Manual (Page 2)

VA-2 GUITAR AMPLIFIER
Owner’s Manual
■ CONTROL PANEL
q INPUT jack
Connect the guitar to this jack.
w CLEAN/DRIVE select switch
When this switch is depressed (>), the DRIVE channel is selected
and a distortion sound is obtained.
When the switch is released (?), the CLEAN channel is selected,
delivering a guitar sound without distortion.
e VOLUME (VOLUME/POWER Switch)
Adjusts the overall volume. POWER and VOLUME switches are
combined. When the POWER is switched ON, the LED indicator
located next to the knob will light.
r TREBLE control
For adjustment of the high-frequency sound level.
t BASS control
For adjustment of the low-frequency sound level.
y PHONES jack
Allows connection of headphones.
■ SPECIFICATIONS
◆ Rated output power
: 1 Wr.m.s.
◆ Speaker
: 7.5 cm (8
Ω)
◆ Channels
: CLEAN/DRIVE
(selectable via a push switch)
◆ Controls : VOLUME, TREBLE, BASS
◆ Input/Output terminals : INPUT, PHONES, DC IN
◆ Power supply
: 9V dry cell battery (6F22 or 006P)
Optional AC adapter (PA-3)
◆ Dimensions (W×H×D) : 150 Ч 122 Ч 86 mm
(5.9" Ч 4.8" Ч 3.4")
◆ Weight : 450g (15.9 oz) * with battery
◆ Accwssory
: 9V dry cell battery (6F22)
× 1
* Specifications and design subject to change without notice.
Thank you for purchasing the YAMAHA VA-2
Guitar Amplifier. The VA-2 is a high performance
2-channel, Clean/Drive, amplifier that produces a
tone that is unbelievable for its size.
To obtain maximum performance please read this
owner’s manual before using the amp, and then
store it in a safe place.
■ SETTING EXAMPLES
Sound Type CLEAN/DRIVE VOLUME TREBLE BASS
Clean cutting sound CLEAN (?) 5 5 4
For electric acoustic guitar CLEAN (?) 4 7 5
Crunch sound CLEAN (?) 8 0 8 10
Natural overdrive sound DRIVE (>) 7 4 10
Hard distortion sound DRIVE (>) 8 7 8
■ PRECAUTIONS
◆ To avoid possible damage do not expose the unit to:
- direct sunlight
- very high or low temperature/humidity
- sand or excessive dust
* Especially inside a vehicle, the temperature may rise
excessively — do not leave the VA-2 in your parked car
on a sunny day!
◆ Before connecting/disconnecting cables or turning the unit
on/off, be sure to set the VOLUME control on the VA-2 to 0.
◆ The VA-2 can be operated with a 6F22 or 006P 9V dry cell
battery or an optional AC adapter (YAMAHA PA-3). Use of a
different AC adapter may damage the unit! When using a
different AC adapter, make sure that its voltage and polarity
(+
–) matches the VA-2.
◆ Always turn the unit off after use. To avoid battery leakage,
remove the batteries when the unit is not to be used for an
extended period of time.
◆ Neon and fluorescent lamps may induce noise. Keep the unit
away from such lighting sources.
◆ Handle the unit carefully — never apply excessive force to
the controls and avoid dropping the unit.
◆ Clean the exterior with a dry, soft cloth. Never use volatile
liquids such as benzine or thinner.
◆ After reading this owner’s manual, keep it in a safe place for
future reference.
■ BATTERY REPLACEMENT
When the overall sound volume decreases or the sound becomes
distorted during battery operation, the batteries are exhausted and
should be replaced with new ones (6F22 or 006P). When the VA-2 is
to be used for longer periods at a time, we recommend the use of an
optional AC adapter (YAMAHA PA-3).
* Be sure to insert the batteries according to the polarity
markings (+ and –).
* Replace the batteries with the power turned off.
9V dry cell battery
(6F22 or 006P)
DC IN
The clip on the back of
the unit can be used to
attach the amp to a
guitar strap or belt.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg zijn, moet u ze
niet weggooien maar inleveren als KCA.
PHONES BASS TREBLE VOLUME DRIVE/
CLEAN
INPUT
GUITAR
AMPLIFIER ON OFF
10 10 0 10 0
VA-2
e r t y q w
9610 R2 Printed in Hong Kong