Yamaha CRX-M5 - Manual (Page 29)

Playing CDs Getting Started
RECORDING USING THE MDX-M5 OR KX-M5
E-23
English
1
Insert the desired CD into the unit, and load the
blank MD into the MDX-M5 or blank tape into the
KX-M5.
• When you use the cassette deck, set the
cassette deck to forward direct and reverse
mode (see the instructions of the cassette deck).
2
Press DISC 1 – 3 to select the desired CD, then
press
7
after playing for several seconds.
3
Press CD SYNC while both units are in stop mode.
The recording source appears in the display.
CD synchronized recording
You can record a CD on a MD or tape by pressing just
one button when you connect the MDX-M5 or KX-M5.
4
Press
4
/
¢
repeatedly to select the recording
source (TAPE or MD).
5
Press CD SYNC.
The unit starts CD play from the beginning of a disc
and the MDX-M5 or KX-M5 starts recording
automatically.
6
Each unit stops automatically when recording is
finished.
Notes
• If you select MD in step 4, the digital signal is recorded
automatically. For details, refer to the instructions of the
MDX-M5.
• When you press INPUT to set the unit MD mode, if you
press CD SYNC, the KX-M5 starts recording the MD source.
Be careful.
To stop CD synchronized recording
Press 7 (TUNER CD).
To record from the desired track using
CD synchronized recording
Press DISC 1 – 3 to select the disc which contains the
desired track and press
7
after playing for several
seconds, then press
4
/
¢
repeatedly to select the
desired track before pressing CD SYNC in step 3
above.
To record a program of tracks using CD
synchronized recording
Before pressing CD SYNC in step 3 above:
1. Program the CD tracks you want to record (see
page 12).
2. Press PGM so that “PROGRAM” appears in the
display.
3. Press CD SYNC.
To record tracks programmed by
Automatic CD edit using CD
synchronized recording
Program the tracks by using the Automatic CD edit
function (see the next page) before pressing CD SYNC
in step 3 above.
Notes
• When the MD or tape becomes full before the end of
recording, each unit stops.
• Adjusting the VOLUME control has no effect on the
recording level.
Before recording
When you record by using the MDX-M5 or KX-M5, you
must first make the connections as shown in
“Connecting other components” on page 5. For details,
refer to the instructions supplied with the MDX-M5 or
KX-M5.
CD SYNC
4/¢
4/¢
DISC 1 – 3
7
FM/AM ST/MONO DISC
MEMORY
TUNER CD
INPUT SLEEP MUTE VOLUME
TAPE
MD
2 3 1
1 2 3 4 5
6 7 8 9 0
PGM
PRESET
/
REC/
PAUSE
REC/
MUTE
CD
SYNC
+10 /
– +
7
STANDBY/ON
RANDOM TIME REPEAT EDIT PROGRAM
MEMORY
FM/AM
INPUT
VOLUME
DISC 1 DISC 2 DISC 3 DISC SELECT
RDS PTY RT
PHONES
TUNING/PRESET