beautypg.com

Setting the clock, Playing cds getting started getting started, English – Yamaha CRX-M5 User Manual

Page 13: Remote control transmitter operation range, Within approximately 6 m (19.7 feet), Press clock for more than two seconds, Press tuning / / ? to set the hour, then press set, Remote control sensor, Clock set tuning

background image

Playing CDs

Getting Started

GETTING STARTED

E-7

English

Remote control transmitter operation range

Notes
• There should be no large obstacles between the

remote control transmitter and the main unit.

• If the remote control sensor is directly illuminated by

strong lighting (especially an inverter type of
fluorescent lamp etc.), it might cause the remote
control transmitter not to work correctly. In this case,
reposition the main unit to avoid direct lighting.

STANDBY/ON

RANDOM

TIME

REPEAT

EDIT

PROGRAM

MEMORY

FM/AM

INPUT

VOLUME

DISC 1

DISC 2

DISC 3

DISC SELECT

RDS

PTY

RT

PHONES

TUNING/PRESET

30°

30°

Remote control
sensor

Within approximately
6 m (19.7 feet)

Setting the clock

1

Press CLOCK for more than two seconds.

2

Press TUNING

/

/

?

to set the hour, then press

SET.

3

Press TUNING

/

/

?

to set the minute, then press

SET.

The clock starts.

To display the clock

Press CLOCK.
The current time appears for three seconds, then the
normal display returns.

Note

• In the event of a power failure or when the AC power cord is

disconnected for more than three seconds, you must reset
the clock.

POWER

TIMER

SET

TUNING

FM/AM

ST/MONO

DISC

MEMORY

TUNER CD

CLOCK

CT

PTY

RT

RDS

/

2

3

1

1

2

3

4

5

TIME

REP

EDIT

PGM

PRESET

/

CLOCK

SET

TUNING //?

You must set the clock before you can use the timer
functions. The clock is based on a 24-hour system for
the U.K., Europe, Australia, Singapore, and General
models, and a 12-hour system for U.S.A and Canada
models.
You can set the clock while in standby mode.

Note

• This manual describes how to operate this unit by using

the remote control transmitter mainly. To operate the
unit from the front panel, use the corresponding buttons
on the front panel (see page 3).