Yamaha RP-U200 - Manual (Page 47)

E-
9
CONNECTIONS
CONNECTIONS
R L
ANALOG
AUX 1
IN
AUX 2
IN
REC
OUT
OUTPUT
SUB
WOOFER
DIGITAL
USB
SPEAKERS
+ —
L
FRONT
ANTENNA
R L
PC IN
FM ANT
75 Ω UNBAL.
AC outlet
Connecting an FM antenna
Connect an FM antenna to the FM ANT terminal of this unit by following the figure and procedures below.
(U.S.A. model)
Plugging in this unit
It is recommended to use an outdoor FM antenna for good
reception.
Depending the area, good reception may not be obtained
because it is far from FM radio stations or obstructed by tall
buildings, mountains, and so on. Select a type of antenna
suitable for your area.
Also, to minimize the effects of automobile ignition noise,
locate the antenna as far away from heavy traffic as
possible.
●
Use the supplied indoor FM antenna only in areas with
exceptionally good reception.
Insert the antenna connector securely.
* Set the indoor FM antenna as far away from the
computer and the monitor as possible, and set it to a
position where the best reception is obtained.
● For connecting an outdoor FM antenna
Use a 75
Ω
coaxial cable for connecting the antenna.
If the antenna is located far from this unit, the use of
5C2V cable is recommended to handle the weak radio
signal.
*
If you connect an outdoor FM antenna to this unit, do
not connect the indoor FM antenna to this unit.
After completing all connections, plug the AC power
cord into a household AC outlet.
Note
Unplug the AC power cord from the AC outlet if this unit is
not to be used for a long period of time.
Indoor FM antenna (supplied)
Outdoor FM antenna
F-type plug adaptor
75
Ω
coaxial cable
(U.S.A. model)
(U.S.A. model)