beautypg.com

Basic operation, Playing a source, English – Yamaha RP-U200 User Manual

Page 13: About the input selector keys, Adjust the volume to the desired level, Decrease the volume to minimum (min)

background image

E-

9

BASIC OPERATION

English

BASIC

OPERATION

BASIC OPERATION

Playing a source

4

Start the selected input source.

Refer to “Listening to an FM broadcast” on pages 14–18

about how to tune into a desired station.

5

Adjust the volume to the desired level.

6

As you prefer, use a sound field program.

Refer to page 11 for details about the sound field programs.

About the input selector keys

Each of the input selector keys selects the following input signals.

PC:

Press the PC key repeatedly to select the PC inputs:
“USB”, “PC_DIGT” and “PC_ANLG”. PC_DIGT selects
the DIGITAL PC COAX IN or DIGITAL PC OPT IN, and
PC_ANLG selects the ANALOG PC IN.
Note: The DIGITAL PC OPT IN has priority over the
DIGITAL PC COAX IN, so if you connect to both inputs,
the signal received at the DIGITAL PC OPT IN is used.

AUX1:

Press the AUX1 key repeatedly to select the inputs:
“AUX1_DG” and “AUX1_AN”. AUX1_DG selects the
equipment connected to the DIGITAL AUX 1 OPT IN, and
AUX1_AN selects the equipment connected to the
ANALOG AUX 1 IN connector as the input source.

AUX2:

Press the AUX2 key to select
the equipment connected to
the ANALOG AUX 2 IN
connectors as the input
source.

TUNER:

Press the TUNER key to select the built-in FM tuner as
the input source.
* When the TUNER key is pressed, “TUNER” appears

first on the display, and then changes to the display of
a frequency or a preset station.

This section explains how to turn on this unit and select
input sources. If any external audio equipment is
connected to this unit, turn it on first.

1

Turn on this unit.

The message “Hello” appears for a few seconds, and this

unit returns to the state in which it was last used (e.g., the

input source that was selected when this unit was turned off

is selected).

2

Decrease the volume to minimum (MIN).

3

Select an input source by using the input selector
keys.

The corresponding indicator on the front panel lights up.

Refer to the explanation on the right side for details about

using the input selector keys.

PC

AUX1

AUX2

TUNER

DSP

P-SET

VOL

VIRTUAL

5.I

CH

DIGITAL
PROLOGIC FM AM ST

USB PCM

D. DSP

PC

AUX1

AUX2

TUNER

JAZZ

CHURCH

HALL

B

C

A

MOVIE

LIVE

PRESET

MANUAL

MEMORY

GAME

TEST

ON/OFF

/ D T S

SURROUND

VOLUME

MUTE

POWER

3

2, 5

1

3

2, 5

1

POWER

Front panel

or

Remote control

VOLUME

Front panel

or

Remote control

TUNER

PC

AUX1

AUX2

TUNER

PC

AUX1

AUX2

Front panel

or

Remote control

VOLUME

Front panel

or

Remote control

VOL

VOL

VOL

VOL

VOL

VOL

VOL

FM

ST

VOL

FM

ST