Ipod – Yamaha E810 User Manual

Page 64

Troubleshooting

■

iPod

In case of a transmission error without a status message appearing in the front panel and in the OSD, check the connection to your iPod
(see page 17).

Note

Status message

Cause

Remedy

See

page

The receiver is in the middle of
recognizing the connection with your
iPod.

The receiver is in the middle of acquiring
song lists from your iPod.

Connect error

There is a problem with the signal path
from your iPod to the receiver.

Turn off the receiver and reconnect the YAMAHA
iPod universal dock to the DOCK terminal of the
receiver.

Try resetting your iPod.

—

Unknown type

The iPod being used is not supported by
the receiver.

Only iPod (Click and Wheel), iPod nano, and iPod
mini are supported.

—

iPod connected

Your iPod is properly stationed in a
YAMAHA iPod universal dock (such as
YDS-10 sold separately) connected to the
DOCK terminal of the receiver, and the
connection between your iPod and the
receiver is complete.

Disconnected

Your iPod was removed from a YAMAHA
iPod universal dock (such as YDS-10 sold
separately) connected to the DOCK
terminal of the receiver.

Station your iPod back in a YAMAHA iPod universal
dock (such as YDS-10 sold separately) connected to
the DOCK terminal of the receiver.

Unable to play

The receiver cannot play back the songs
currently stored on your iPod.

Check that the songs currently stored on your iPod
are playable.

—

Store some other playable music files on your iPod.

—