Yamaha CDR-HD1500HDD - Manual (Page 66)

60
EDITING TRACKS
Track Erase
You can erase a selected track.
1.
If “Track Erase” is selected (P.58), the following
screen appears.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
2.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be erased.
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
The number of the track to be erased flashes.
Press CLEAR to cancel the confirmed selection.
4.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to be erased.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
Press CLEAR to cancel the confirmed selection.
To check the track to be erased, press w/d. This unit starts to
play the track to be erased repeatedly.
6.
Press COMPLETE.
The selected track is erased.
This unit returns to the editing menu item selection. (If the edit
menu is carried on during playback, playback restarts.)
Memo
The number of the track that has been erased will be available for
future use.
E r a s e 0 0 1 1 ?
GROUP L
R dB –30 –10 –6 –2 0
Track to be erased
Disc that contains the track to be erased
Part Erase
You can erase part of a selected track.
1.
If “Part Erase” is selected (P.58), the following screen
appears.
If the edit menu is selected during playback, the unit
automatically selects the item to be edited. In this case, skip to
step 6 since you do not need to select an item.
2.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select the disc that contains the track to
be partially erased.
3.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the disc.
The number of the track to be partially erased flashes.
Press CLEAR to cancel the confirmed selection.
4.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select the track to be partially erased.
5.
Press the MULTI JOG knob (ENTER on the remote
control) to confirm the track.
The passage between the point that is 5 seconds before the
temporary beginning point of the partial erase and the
temporary beginning point (the point that is 10 seconds elapsed
from the beginning of the track) is repeatedly played.
6.
Rotate the MULTI JOG knob (press +/– on the remote
control) to select the beginning point of the partial
erase.
The beginning point of the partial erase can be set by “minute:
second: frame”. The unit to be set is flashing. Move the flash to
the unit to be set by pressing t/e or r/y (E or R on
the remote control).
If you stop rotating the MULTI JOG knob, this unit searches
for the beginning point according to the setting made, and starts
repeated playback of the passage between the point that is 5
seconds before the beginning point and the beginning point.
P r t . E r . 0 0 1 1 ?
GROUP L
R
dB –30 –10 –6 –2 0
Disc that contains the track to be partially erased
Track to be partially erased
0 0 5 A 0 1 0 0 0
TIME
Beginning point (minute: second: frame)
Playing time of the track
106_HD1500(E)58-70.p65 3/18/05, 15:46 60