Yamaha CDR-HD1500HDD - Manual (Page 46)

40
COPYING FROM THE HDD ONTO A CD-R/CD-RW DISC
■ Copying selected tracks on the HDD
You can copy favorite tracks on the HDD to a CD-R or CD-RW disc.
RECORDER
TEXT/TIME MODE
MULTI JOG
DIGITAL REC LEVEL
PUSH ENTER
TRACK NO.
FINALIZE ERASE
BOOKMARK
COMPLETE
MENU
CLEAR
MIN MAX
OPTICAL
ANALOG REC LEVEL INPUT
REC
COAXIAL
ANALOG
COPY
A.M.Q.R.
CDR
w /d FINALIZE
COPY MULTI JOG
MODE
ENTER
MENU
COMPLETE
TRACK NO.
WRITE
HDD
CDR
GROUP SKIP
CLEAR
OPEN/CLOSE
COPY
FINALIZE
REPEAT
1
A B C
2
D E F
3
G H I
4
J K L
5
M N O
6
P Q R
7
S T U
0
SPACE
MODE MENU
8
V W X
10
SYMBOL BOOKMARK
9
Y Z
A. M. Q. R.
ERASE
RANDOM
TIMER REC
INTRO
REC
INPUT
TEXT/TIME
W /D
GROUP SKIP buttons
+, –
H , G
COPY
FINALIZE
1.
Set a new or not finalized CD-R (or CD-RW) disc in
the disc tray, then select the HDD and add book-
marks to favorite tracks (P.24).
Tracks are listed and stored in order that the bookmarks have
been placed.
2.
Press COPY twice.
This unit enters the CDR copy standby mode. Copying has not
been started yet at this stage.
Memo
In the CDR copy standby mode, you can specify the settings
for disc copy. For details, refer to “Setting the CDR copy
mode” (P.42) and “Setting the CDR copy menu” (P.43).
3.
Rotate the MULTI JOG knob (press +/–, GROUP SKIP
buttons, H or G on the remote control) to select
“Mrk”.
Memo
You can create a CD with high quality sounds using the Audio
Master Quality Recording feature. For details, refer to
“Copying high quality sounds (Audio Master Quality
Recording)” (P.41).
4.
Press w/d to start copying
The progress of the copy process is shown in the display.
M r k 1 “ 1 0 0 0
MARK
REC
GROUP
CDR
L
R
dB –30 –10 –6 –2 0 ALL SYNC ANLG
M r k 1 “ 1 0 0 1
MARK
REC
GROUP
CDR
L
R
dB –30 –10 –6 –2 0 ALL SYNC ANLG
Memo
The OPC (Optimum Power Control) feature may start
automatically depending on disc conditions. In this case, the
message “OPC Adjust” appears on the display until the
adjustment is done (about 10 seconds) before the copy process
starts.
Note
CD TEXT is copied only when selecting “Full Auto” in the
CDR copy mode for a new CD-R or CD-RW disc.
When copying has been completed, the operation of
the HDD and the CD automatically stops.
5.
To carry out the finalization process (P.47), press
FINALIZE.
R e c o r d i n g 1 %
MARK
AUTO
REC
GROUP
CDR
L
R dB –30 –10 –6 –2 0 SYNC ANLG
104_HD1500(E)38-49.p65 3/22/05, 14:49 40