Zebra Technologies Zebra S Series 105SL - Manual (Page 86)

62 105SL User Guide 6/4/2004 11342L Rev. 8
Data Ports
Serial Data Port
RS-232 Interconnections Using a DB-25 Cable
To connect the printer’s RS-232 DB-9 interface to a DB-25 connector, an interface adapter is
required (part number 3138). A generic DB-25 adapter may also be used, however, the +5
VDC signal source would not be passed through.
Figure 36 illustrates the connections required
for the DB-9 to DB-25 interface.
Figure 36 • DB-9 to DB-25 Connections
Note • The cable used to connect the printer to a computer must be a null modem (crossover)
cable. If you want to connect the printer to any other DTE devices, you must also use a null
modem cable.
Male DB-9 Adapter
Connector
(plugs into printer)
Female DB-25 Adapter
Connector
(plugs into cable)
NOTE: Pin 1 of DB-9 connector is unused and unterminated.
FG
TXD
RXD
RTS
DSR
SG
DTR
RXD
TXD
DTR
SG
DSR
RTS
CTS
+5 VDC
SIGNAL
2
3
4
5
6
7
8
9
1
2
3
4
6
7
9
20
+5 VDC
SIGNAL
5
CTS