beautypg.com

Speaker setup for this unit, Speakers to be used, Speaker configuration – Yamaha RX-V590RDS User Manual

Page 6: Speaker placement

background image

6

SPEAKER SETUP FOR THIS UNIT

SPEAKERS TO BE USED

This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The speakers to be used with this unit
will be mainly front speakers, rear speakers, and a center speaker. (You can omit the center speaker. Refer to the “4-Speaker
Configuration
” shown below.)
The front speakers are used for the main source sound and the effect sound. They will probably be the speakers of your present
stereo speaker system. The rear speakers are used for the effect sound. And the center speaker is used for the center sound
(dialog etc.) encoded with the Dolby Surround. The rear and center speakers do not need to be equal in power to the front
speakers. However, all the speakers should have high enough power handling to accept the maximum output of this unit.

SPEAKER CONFIGURATION

5-Speaker Configuration

This configuration is the most effective and recommended one.
In this configuration, the center speaker is necessary as well as
the rear speakers. If the digital sound field program DOLBY
PRO LOGIC
or DOLBY PRO LOGIC ENHANCED is selected,
conversations will be output from the center speaker and the
ambience will be excellent.

Set the center channel mode to the “NORMAL” or “WIDE
position. (For details, refer to page 14.)

4-Speaker Configuration

The center speaker is not used in this configuration. If the
digital sound field program DOLBY PRO LOGIC or DOLBY
PRO LOGIC ENHANCED
is selected, the center sound is
output from the left and the right front speakers. However, the
sound effect of other programs can be the same as that of the
5-speaker configuration.

Be sure to set the center channel mode to the “PHANTOM
position. (For details, refer to page 14.)

SPEAKER PLACEMENT

The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal
stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following.

Front:

In normal position. (The position of your present
stereo speaker system.)

Rear:

Behind your listening position, facing slightly inward.
Nearly six feet (approx. 1.8 m) up from the floor.

Center: Precisely between the front speakers. (To avoid

interference with TV sets, use a magnetically shielded
speaker.)

Front L

Center

Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L

Rear R

Front L

Front R

Dialogue

Surround sound

Dialogue

Surround sound

Rear L

Rear R

Front R

Center

Front L

TV set

Rear R

Rear L