Preset tuning, 20 manual preset tuning – Yamaha RX-V590RDS User Manual
Page 20
1
Tune to a desired station.
(Refer to the previous page for tuning procedure.)
2
Select a desired page (A – E) of preset station buttons
while watching the display.
3
4
Press a preset station button before “MEMORY”
goes off from the display.
*
In the same way, program other stations to A2, A3 ... A8.
*
You can program more stations to the preset station
buttons on other pages in the same way by selecting
other pages in step 2.
1
1
Select the page of preset station buttons.
2
2
Select the desired preset station button.
Notes
●
A new setting can be programmed in place of the former
one.
●
For presets, the setting of the reception mode (stereo or
monaural) is stored along with the station frequency.
Memory back-up
The memory back-up circuit prevents the programmed data
from being lost even if the POWER switch is set off or the
power plug is disconnected from the AC outlet or the power is
cut due to temporary power failure. If, however, the power is
cut for more than one week, the memory may be erased. If
so, it can be re-programmed by simply following the PRESET
TUNING steps.
20
MANUAL PRESET TUNING
This unit can store station frequencies (selected by tuning operation) by using the preset station buttons. With this function, you can
select any desired station by only pressing the corresponding preset station button. Up to 40 stations (8 stations x 5 pages) can be
stored.
PRESET TUNING
To store stations
To recall a preset station
3
2,
1
1
4,
2
2
(Preset station buttons)
A/B/C/D/E
PRESET
MEMORY
MAN’L/AUTO FM
MEMORY
A/B/C/D/E
PRESET
Flashes on and off
for about 5 seconds.
l
2
3
4
5
6
7
8
PRESET STATIONS
l
2
3
4
5
6
7
8
PRESET STATIONS
PRESET
MHz
FM
STEREO
0
20
l00
REAR
AUTO TUNING
Shows the displayed station has been
programmed to A1.
PRESET