beautypg.com

Midi data format – Yamaha PLG150-VL User Manual

Page 41

background image

MIDI Data Format

41

RPN Data-entry

LSB

MSB MSB

parameter

Data Range

00H

00H

mmH

Pitch Bend Sensitivity

mm:00H-18H (0-+24)
Default:02H

01H

00H

mmH

Fine Tune

mm:00H-40H-7FH
(-64-0-+63)
Default : 40H 00H

02H

00H

mmH

Coarse Tune

mm:28H-40H-58H
(-24-0-+24)
Default : 40H 00H

7FH

7FH

—

Null

—

5. CHANNEL MODE MESSAGES

78H

Cntrl#

parameter

Data Range

120

————

0

Terminates all sounds currently sounding. However, the status of channel messages are
maintained.

79H

Cntrl#

parameter

Data Range

121

————

0

The values of the following controllers will be reset to the defaults.
Pitch Bend

Center

Channel Aftertouch

0

Modulation

0

Breath Control

Max

Foot Control

Max

Expression

Max

Control Change 13

Center

Hold 1

Off

Portamento

Off

Soft Pedal

Off

RPN

Null

7BH

Cntrl#

parameter

Data Range

123

————

0

Terminates all notes currently on. However, if Hold 1 is on, notes will continue sounding
for the time set previously.

7CH

Cntrl#

parameter

Data Range

124

————

0

Performs the same function as when an All Notes Off message is received.

7DH

Cntrl#

parameter

Data Range

125

————

0

Performs the same function as when an All Notes Off message is received. It will not acti-
vate OMNI ON.

7EH

Cntrl#

parameter

Data Range

126

Mono

0...16

Performs the same function as when an All Sounds Off message is received, and if the 3rd
byte (mono number) is in the range of 0 - 16, and sets the instrument to Mono Mode.

7FH

Cntrl#

parameter

Data Range

127

————

0

Performs the same function as when an All Sounds Off message is received, and sets the
instrument to Poly mode.

6. CHANNEL AFTERTOUCH

Status:

DnH

If the Part Parameter Rcv CHANNEL AFTER TOUCH = OFF, that Part will not receive
Channel After Touch Messages.

7. SYSTEM EXCLUSIVE MESSAGES

If the Part Parameter Rcv SYSTEM EXCLUSIVE = OFF, that Part will not receive Sys-
tem Exclusive Messages.


1)MIDI Master Volume(receive only)

F0H, 7FH, xnH, 04H, 01H, llH, mmH, F7H
xn : n=Device Number, xn=7F : Broadcast
ll : Master Volume LSB
mm : Master Volume MSB

When received, the Volume MSB will be effective for the System Parameter MASTER
VOLUME.

2)General MIDI System On (receive only)

F0H, 7EH, 7FH, 09H, 01H,F7H or F0H, 7EH, xnH, 09H, 01H, F7H
xn : n=Device Number


[VL70-m Native Format]

F0H, 43H, 1nH, 57H, ahH, amH, alH, ddH, ~, ddH, F7H
1n : n=Device Number
ah : Address High
am : Address Mid
al : Address Low
dd : Data

1) VL System Parameters

See

2) Current Voice / Common Misc Parameters

See

3) VL Part Parameters

See

4) Current Voice / Element Parameters

See

[XG Format]

F0H, 43H, 1nH, 4CH, ahH, amH, alH, ddH, ~, ddH, F7H
1n : n=Device Number
ah : Address High
am : Address Mid
al : Address Low
dd : Data

1) XG System On(receive only)

See

2) XG System Parameters

See

3) Multi Part Parameters

See

When this message is sent, the preset Part Number is used.

[Other]

1) MIDI Master Tune(receive only)

F0H, 43H, 1nH, 27H, 30H, 00H, 00H, mmH, llH, ccH, F7H
1n : n=Device Number
mm : Master Tune MSB
ll : Master Tune LSB
cc : Don’t care
When received, the System Parameter will reflect the Master Tune.

(receive only)
[VL70-m Native Format]

F0H, 43H, 0nH, 57H, bmH, blH, ahH, amH, alH, ddH, ~, ddH, ccH, F7H
0n : n=Device Number
bm : Byte Count MSB
bl : Byte Count LSB
ah : Address High
am : Address Mid
al : Address Low
dd : Data
cc : Check Sum

1) VL System Parameters

See

2) Current Voice / Common Misc Parameters

See

3) VL Part Parameters

See

4) Current Voice / Element Parameters

See

5) Custom Voice Parameters

See

6) Internal Voice Parameters

See

[XG Format]

F0H, 43H, 0nH, 4CH, bmH, blH, ahH, amH, alH, ddH, ~, ddH, ccH, F7H
0n : n=Device Number
bm : Byte Count MSB
bl : Byte Count LSB
ah : Address High
am : Address Mid
al : Address Low
dd : Data
cc : Check Sum

1) XG System Parameters

See

2) Multi Part Parameters

See

For the Address and Byte Count, refer to the supplementary tables.
Here, the Byte Count is indicated by the “TOTAL SIZE” in the table.
The block’s leading byte is the Bulk Dump and Dump Request’s Address.
A “Block” is the lumped together unit which is bound by the “Total Size”.
The Check Sum is the value that results in a value of 0 for the lower 7 bits when the
Address, Byte Count, Data, plus the Check Sum itself are added.

3) Part Assign (MIDI Parameter Change)

See

F0H 43H 1nH 4CH 70H nnH ssH ppH F7H
n: Device Number
nn: Plug-in Board Type (PLG150-VL is "00.")
ss: Serial Number (which identifies the PLG boards when two same boards are installed)

00: for first PLG150-VL
01: for second PLG150-VL

pp: Part Number (to which the PLG150-VL is assigned.)

00: Part 1
.
.
0F: Part 16
7F: off

8. REALTIME MESSAGES

(receive only)

Status:

FEH

Once Active Sensing is received, if no MIDI data is received for longer than an interval of
300msec, the instrument will perform the same function as when ALL SOUND OFF and
ALL NOTE OFF, RESET ALL CONTROLLER messages are received, and will return to
the status in which Active Sensing is not monitored.

See also other documents in the category Yamaha The input devices: