Song recording, Cselect the desired track for recording – Yamaha CVP-103M EN User Manual
Page 116
116
CVP-103
C
Select the desired track for recording.
......................................
Press the
TRACK < and > buttons or use the data dial or [–] and [+]
buttons to select the track.
• Track 10 (and 9, in some cases) can
only be used to record the rhythm
sound of the accompaniment style and
cannot be used to record keyboard
part. Also, the keyboard part should be
recorded on a track other than those
used for Harmony or Auto Accompani-
ment.
• When the RHYTHM tracks (9 and 10)
or the Auto Accompaniment tracks (9
through 16) are set to REC, the metro-
nome will sound to provide a timing
guide.
• If the Auto Accompaniment and/or
Harmony are already on when the
Track Recording page is selected, the
corresponding tracks are automatically
record-enabled.
➔
The selected track is indicated by an underline mark.
Use the rightmost LCD button to set the selected tracks to
REC (re-
cording enabled) or
OFF (recording/playback disabled). When a track is
set to
REC, the Synchronized Start mode is turned on. The Clavinova
will start recording when you begin to play on the keyboard.
PLAY can only be selected for tracks which contain data.When a
track is muted, the track number is displayed without a surrounding box.
Three separate tracks can be set to record simultaneously when re-
cording keyboard parts.
If you intend to record using the Dual or Split functions, two tracks
must be record-enabled.
If you intend to use both the Dual and Split functions simultaneously,
three tracks must be selected.
If the Auto Accompaniment and/or Harmony are turned on, the re-
cording track numbers are automatically fixed, as described below.
* If the Auto Accompaniment is turned on, tracks 9 through 16 are au-
tomatically set to record the Auto Accompaniment data. If the Har-
mony function is turned on and a harmony type (page 70) other than
Duet, Trio, Block, 4 Part, Country, Octave, or 1+5 is se-
lected, tracks 6 through 8 are automatically set to record the Harmony
data.
When the
RHYTHM button is pressed, tracks 9 and 10 are automati-
cally selected for the rhythm data. Set tracks 9 and 10 to
REC, PLAY, or
OFF using the rightmost LCD button.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Song Recording
114