Print setup – Zebra Technologies TTP 8000 User Manual
Page 77
77
Default Parameter Settings
Print Setup
10/19/2009
TTP 8000 Technical Manual
P1003638-003
Print Setup
Controls what the printer does with buffered data:
Spooling all data makes the printer as quiet as possible. “Nothing” happens until the buffer is
full or a print triggering command is received. The result is that when the printer prints it feeds
the paper at a constant pace. A drawback may be that the printer seems dead for a while before
starting to print.
Print at once gives the fastest printout because the printer prints as soon as it finds some white
space across the paper and then stops to buffer new data. This generates an on/off sound which
may be more irritating than the even buzz that you get when you buffer data.
Experiment with the setting and decide what is best for your application.
A long burn time gives darker print. On insensitive paper types you may have to increase the
burn time to get an acceptable print quality.
6
0 Default
Buffer Mode
0 Min
3 Max
Spool all data before printing
Print text at once but spool graphic data
Print graphic data but spool text
Print both text and graphic at once
7
14 Default
Burn Time
DRV
1 Min
20 Max
Note •
•
The burn time setting has priority over the speed setting, so if you increase the burn time
the speed will go down to an appropriate setting.
•
DRV indicates that, when using Windows, the driver takes over this setting so please set
appropriate value in the driver properties/document defaults.