Zebra Technologies TTP 8000 - Manual (Page 21)

21 Installation
Making a Test Printout
10/19/2009 TTP 8000 Technical Manual P1003638-003
Making a Test Printout
You can make a self-test printout if you want to verify that the printer operates correctly. See
Self-test Printout and Other Power ON Modes on page 29 .
Paper Path Adjustment
Paper Width
When delivered, the paper width is adjusted to 210-mm for A4, and 216-mm for Letter paper
versions of the printer. To adjust the width, do as follows:
1. Loosen the two screws on each side that holds the guide wings (see Figure 2, Printer
Exterior, Side View, on page 10 ).
For A4-paper Pull the wings together as much as possible, and then tighten the
screws.
For Letter paper Push the wings apart as much as possible, and then tighten the
screws.