Ultratec Miniprint 425 - Manual (Page 27)

This chapter describes all of the settings you can change with
the options key.They are listed in the order they appear on
the display when you press the options key (
+ ) and
then the key. Use the to show the different
settings for each option. Use the key to select a setting.
Setting the print case
Follow these steps to print in all uppercase letters:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the to change the option.
3. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Setting the print size
Follow these steps to print either 14 or 19 characters on a
line instead of 24 characters:
1. Press the options key ( + ).You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see PRINT SIZE (NORMAL).
3. Press the to change the setting to BOLD or WIDE.
4. Press the key to save the new setting and leave
options or press the key to save and go to the next
option.
Return
Esc
Spacebar
Return
3 Ctrl
Return
Esc
Spacebar
3 Ctrl
Return
Spacebar Return
3 Ctrl
O P T I O N S • 2 5
C H A P T E R
4
OPTIONS