Ultratec Miniprint 425 - Manual (Page 21)

INTERRUPT.The other person can choose to stop typing and
let you go ahead or ignore your interruption and continue.
If you see INTERRUPT on your display while you are typing, it
means that the other person wants to interrupt you and start
typing.You can choose to stop and let the other person go
ahead or continue typing yourself.
Interrupt only works with newer TTYs and when the other
person is typing continuously. If the other person does not
stop typing when you press
+ , the other TTY probably
does not have the interrupt feature.
You can turn off interrupt so that the other person cannot
send an interrupt to you. See Turning off interrupt on page
27.Turning off interrupt does not affect your outgoing
interrupts—you can still send an interrupt to the other
person.
Wait for response
If the other person tells you to hold and you think it might
take a long time before they come back, use the wait-for-
response feature.The Miniprint 425 will flash the ring flasher
when the other person starts typing again. Follow these steps
to turn on wait for response:
1. When you see the other person type HOLD PLEASE or
something similar, hold down the and keys and
press the key ( + + ).The display says WAITING.
2. When you see the ring flasher flashing, the other person is
typing. Continue your conversation.The flashing will stop
when you start typing.
Change to other TTY
If you want to change TTYs in the middle of a conversation,
you can put the call on hold, go to another TTY, and tell the
Miniprint 425 to hang up.You must be using direct connect
to use this feature. Follow these steps to use the change-to-
other-TTY feature:
W Shift Ctrl W
Shift Ctrl
I Ctrl
C A L L I N G • 1 9