Via text management, Setting backup mode, 9 setting – Texas Memory Systems RamSan-300/320 User Manual
Page 71: Backup mode, Section 6.9 ), Section 6.9 – setting backup mode ), 9 setting backup mode
6.8.2 Via Text Management
To delete LUNs via the Text Management Interface:
• From the Telnet Main Menu, select “LUN Setup”
• Select “Delete LUN(s)”
• Select a LUN or LUNs and press Enter.
• Confirm LUN deletion by pressing “Y” or cancel by pressing “N”
– see Figure 6-15: Deleting LUNs
• Select “Exit to the LUN configuration menu”
Figure 6-15: Deleting LUNs
To verify the deletion of the LUN, view the LUN Configuration menu
for a total number of LUNs.
• To save the changes once you have completed all LUN
configuration, select “Save changes and exit”
6.9 Setting backup mode
The RamSan-320 allows the administrator to set backup modes for each
LUN individually.
Warning:
TMS does not recommend changing backup modes while the system is
actively transferring data.
RamSan-300/320 User’s Manual
- 67 -