Adding luns, Via web interface, 2 adding luns – Texas Memory Systems RamSan-300/320 User Manual
Page 58: Section 6.2 )
6.2 Adding LUNs
The RamSan allows the administrator to add LUNs through the Text
Management Interface and the web interface.
6.2.1 Via Web Interface
To add LUN(s) via the web interface:
• Click on the “Management Control Processor” graphic
• Click on the “LUN Config” tab
• Click the “New LUN” button
• Select a “LUN number” from the drop-down box
• Adjust the “LUN size” using the scroll bar
• Assign links to FC ports (see Section 6.4 – Linking LUNs to/from
• Assign LUN masks (see Section 6.7 – Managing access lists)
• Set backup mode (see Section 6.9 – Setting backup mode)
• Click the “OK” button
• The system adds the specified LUN.
Figure 6-3: Adding LUNs via the Web Interface
RamSan-300/320 User’s Manual
- 54 -