Yamaha DVD-S700 - Manual (Page 12)

12
Connection
Connecting to an AV amplifier which does not contain Dolby Digital (AC-3)/MPEG
audio decoder
This DVD/VIDEO CD/CD player contains a Dolby Digital (AC-3)/MPEG audio decoder. This enables the playback of DVDs recorded
in Dolby Digital Surround, MPEG audio or Linear PCM without the need for an optional decoder with Dolby Digital, MPEG audio or
Linear PCM processing. When the DVD player is connected to an AV amplifier with 5.1ch input connectors, you can enjoy theater-
quality audio right in your home when playing discs recorded in Dolby Digital Surround, MPEG audio or Linear PCM.
Notes:
Á
After connection is made, set the “Speaker setting” (such as
Yes/No and Large/Small) according to your speaker sys-
tem. (See page 39.)
Á If the surround speakers or the center speaker can’t be in-
stalled at an equal distance to (or further away from) the
front speakers from the listening position, then change the
delay time setting at the “Speaker setting” on page 39, to
compensate.
Á
If the surround speakers are set to “None” at the “Speaker
setting” (see page 39), the discs recorded in MPEG 2 audio
or Linear PCM will be played back only in 2 channels even
when the center speaker is connected as well as the front
speakers.
Á DVDs recorded in Linear PCM/96 kHz sampling in which
“Center Speaker” is contained will also be played back only
in 2ch.
PCM/ U DIGITAL
MPEG
COAXIAL
DIGITAL
OPTICAL
L
AUDIO OUT VIDEO OUT
SUBWOOFER
CENTER SURROUND
6CH DISCRETE MIXED 2CH VIDEO
MAIN
AC IN
S VIDEO
L
R R
R
L
2
1
SURROUND MAIN
VIDEO SIGNAL
AUDIO SIGNAL
DVD/LD
CENTER
6CH DISCRETE INPUT DVD/LD
SUB
WOOFER
L
R
L
R
TV set (optional)
AV amplifier without
Dolby Digital (AC-3)/
MPEG audio decoder
(optional)
Audio cord
(optional)
Video/audio cord (supplied)
DVD/VIDEO CD/CD player