Link: ipmaps, Ipmaps – Netopia 2200 User Manual
Page 82
82
10.
Select the
Save and Restart
link to complete the entire Pinhole creation
task and ensure that the parameters are properly saved.
☛
NOTE:
REMEMBER: When you have re-assigned the por t address for the embedded
Web ser ver, you can still access this facility.
Use the Gateway’s WAN address plus the new por t number.
In this example it would be
210.219.41.20:8100
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to
access the web and 192.168.1.x:23 to access the telnet ser ver.
Link:
IPMaps
IPMaps suppor ts one-to-one Network Address Translation (NAT) for IP addresses assigned
to ser vers, hosts, or specific computers on the LAN side of the Netopia Gateway.
A single static or dynamic (DHCP) WAN IP address must be assigned to suppor t other
devices on the LAN. These devices utilize Netopia’s default NAT/PAT capabilities.