Netopia 4652 User Manual
Page 30
6-30 Getting Started Guide
If you do not see the Main Menu, verify that:
■
If you are using a serial connection, that your serial por t speed is the same as the Netopia 4652’s default
9600 baud, for first use.
■
The computer used to view the console screen has its serial por t connected to the Netopia 4652’s
Console por t or an Ethernet connection to one of its Ethernet por ts. See
“Connecting a Console Cable to
or
“Connecting through a Telnet Session” on page 5-26
.
■
Telnet or the terminal emulation software is configured for the recommended values.
■
If you are connecting via the Console por t, your computer’s serial por t is not being used by another device,
such as an internal modem, or an application. Turn off all other programs (other than your terminal
emulation program) that may be inter fering with your access to the por t.
■
You have entered the correct password, if necessar y. Your Netopia 4652’s console access may be
password protected from a previous configuration. See your system administrator to obtain the password.
See the Firmware User’s Guide chapter on “Troubleshooting” for more suggestions.
Netopia 4652
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...