NDC comm Instant Wave - Manual (Page 17)

step4. From the Choose Destination Location dialog box accept the program
files default location, C:\Program Files\Wireless LAN AP SB, or click
Browse to choose another location. Then click Next
step5. To install the full program, choose Typical. Choosing Custom to open
another screen with the option to install only selected parts of the
management program. Click Next
step6. The setup program will copy the necessary files into the specified
directory. When the installation is progressing, the setup program will
ask you to insert disk 2. File copying progress will be displayed in the
setup screen. You can stop the process anytime by clicking Cancel
step7. After the program files have been copied, click Start/
Programs/Wireless LAN AP SB. You will find the AP COMFig Tool
and on the menu
• The AP COMFig Tool. A simple Windows based AP configuration tool
working through a direct COM port connection to the AP. The AP COMFig
tool is intended for simple first time configuration of AP parameters, or to be
used as a last resort to communicate with an AP (see AP COMFig Tool, page
12)
Uninstalling
Should you wish to uninstall InstantWave from a Windows environment, click
Start/ Programs/Wireless LAN AP SB.
Click Uninstall Wireless LAN AP SB. A confirmation box will ask if you are
sure you wish to remove the program(s). Click Yes.
InstantWave High Rate Access Point 11