NDC comm Instant Wave - Manual (Page 16)

Figure 5. Access Point LEDs
General Color Function
Green Unlit: Power OFF
Blinking: Diagnostic test
On: Healthy condition PWR
(Power/Status)
Red On: Abnormal Condition
E/N(Ethernet) Color Function
Link Green Indicates an Ethernet link. If the
radio fails, this LED will not light
TX/RX Orange Blinks to indicate Ethernet
transmission/reception activity
RF Color Function
Link Green Indicates a wireless link. If the radio
fails, this LED will not light
TX/RX Orange Blinks to indicate radio transmission/
reception activity
Figure 6. LED Functions
AP Management Software Installation/Uninstallation
Installation
step1. Insert the InstantWave High Rate setup disk 1into drive A:
step2. From the Start menu select Run, and type A:\SETUP.EXE
step3. Click the Next button to start the setup program
10 InstantWave High Rate Access Point