Netopia 3347NWG-VGx User Manual
Page 17
13
Section 6:
Configuring Microsoft Windows
Now you will need to configure your computer’s TCP/IP settings so it can
communicate with the DSL gateway. You may need to perform this configuration
on each PC connected to the DSL service.
Configuration Steps for Windows 95/98/ME
1
Double-click on the “My
Computer” icon on your
desktop or click on “Start,”
go to “Settings” and select
“Control Panel.”
NOTE to Windows ME users:
After selecting “Control Panel,”
click on “Show all Control
Panels.”
2
Double-click on the
“Network” icon.
3
You must determine if you have
a TCP/IP “binding” associated
with your Network Ethernet
Adapter. It will be indicated by
a “wire” with “TCP/IP -> Brand
Name NIC” similar to what is
highlighted in the image to the
right. 3Com
®
is the “Brand
Name” for this Network
Ethernet Adapter. If this
binding is already associated
with your Network Ethernet
Adapter, skip to step 8.
4
If there is no binding, you must
add one. Click on “Add.”