Panasonic BB-HCM381 - Manual (Page 72)

Operating Instructions
72
• Set up the IPsec policy as below.
9. Access the camera (see page 19).
• If you can access the camera, the IPsec setup is complete.
Note
• In IPsec communications, "IPsec" is displayed on the Top page or the
Single Camera page.
• If you cannot communicate using IPsec, see page 24 of the
Troubleshooting on the CD-ROM.
• See the Panasonic Network Camera support website at
http://panasonic.co.jp/pcc/products/en/netwkcam/ for IPsec features.
Items Settings
Protocol ANY
Source Network Network address and subnet mask on the LAN side of
the VPN router
Source IP address A global address on the WAN side of the VPN router
Destination Network A global address of the camera
Destination IP address A global address of the camera