Panasonic BB-HCM381 - Manual (Page 36)

Operating Instructions
36
1.5.7 Setting Home Position/Alarm Position/Preset
Position
Registering Home Position/Alarm Position
A home position or 2 alarm positions can be registered. When restarted, the
camera takes a home position. If the Lens Position When Triggered setting is set
for buffering images by alarm (see page 113) or by motion detection (see page
125), the camera moves to the alarm position when triggered.
1. Click [Program].
• [Program] switches to [Cancel].
Click [Cancel] to quit without
saving changes.
2. Pan and tilt the camera to a desired
position.
3. Zoom to the desired position.
4. Adjust the focusing if necessary.
5. Select the home position or the
alarm position from the drop-down
list.
6. Click [Save] to register, or click
[Back] and [Cancel] to cancel.
• If "Success!" is displayed, the
position has been registered
successfully. Click [Back].
Pan/Tilt
Zoom
Focus
Program
Home
Position
Home
Position,
Alarm
Position
Drop-down List