Printek 850 Series - Manual (Page 64)

S P E C I F Y I N G F O R M S
5 6
Character to Ignore Char. To
Ignore:
255
Possible Values: 0, ... 255*
This allows a single 8-bit character to be discarded as it is received. This is
useful when the host application is sending an unwanted control character,
for example. Values are in decimal, with printable characters displayed to
the left of the decimal value.
To use this feature:
1) Press the UP/DOWN ARROW keys to select the desired character
decimal value. Printable characters will appear to the left of the number.
2) Press the ITEM button to display Ignore Character On/Off,
then the UP/DOWN ARROW keys to turn the feature On or Off.
This feature should not be turned on unless needed.
Top of Barcode Top of Barcode
Off
Possible Values: On, Off*
In Genicom 3840 or 3410 Emulation, this feature repositions the print head
at the top of a barcode after the barcode has printed. When disabled,
printing continues from the bottom of the barcode.
This feature has no meaning in other emulations.