Printek 850 Series - Manual (Page 52)

S P E C I F Y I N G F O R M S
4 4
Interface Menu
The Interface Menu may contain several submenus. These submenus are
for setting up items pertaining to the hardware interfaces such as the serial
and parallel ports.
In addition to the standard parallel interface and the RS-232C serial
interface, which are furnished with the printer, 10/100BaseT Ethernet may
also be installed. The Setup items for each interface are described in one of
the following sections.
RS-232C Serial Interface on page 45
Parallel/LAN Interface on page 49
Entering the Interface Menu
To Enter the Interface Menu, enter Setup and press the MENU button until
INTERFACE MENU is displayed on the top line as shown below.
INTERFACE MENU
Serial
The SUBMENU options for the INTERFACE MENU always include the
Serial and Parallel/LAN ports. To select the desired interface, press the
SUBMENU button until that interface is displayed on the bottom line. Note
that when the Lan Setup option under the Parallel/LAN item list
is set to On, the serial Interface is not available and will not appear in the
Interface Menu. Next press the ALIGN/ITEM button to begin displaying the
items associated with that interface. Each interface and the items, which
pertain to that interface, are listed on the following pages. Note that many
items are the same for more than one interface since the computer attached
to that interface may have different requirements for each of those items.
The factory default values are indicated with an asterisk (*) in this manual
(the asterisk does not appear on the printer’s display).