Printek 850 Series - Manual (Page 32)

D A I L Y O P E R A T I O N
2 4
UNLOAD:
•
If a form is currently in position to be
printed, this button will pull the form down
until the top of the form is in the tractors.
CHANGE:
•
If the form has already been pulled down to
the tractors as described above, this button
will cycle through all the available form
choices. Forms which are not considered to
be “loaded” in the tractors will flash
< Not
Loaded > on the bottom line of the display.
For more information, see the following
section on “
Selecting and Loading Forms”.
“HIDDEN” (UNDER LID) Buttons – SETUP AND
CONFIGURATION
MENU
This button is used to set up the various operating
parameters of the printer for forms, interfaces,
etc. This button is not used on a daily basis. For
more information see the chapter on “
PRINTER
CONFIGURATION ”.
SUB MENU
This button is used in conjunction with the MENU
button to navigate the menus for setting up
operating parameters, forms definitions, interface
information, etc. For more information, see the
chapter on “
PRINTER CONFIGURATION”.
ALIGN/ITEM
This button will access the horizontal and vertical
print adjustment settings for the selected form,