Printek 4503 - Manual (Page 63)

IBM Proprinter Emulation
Page 4-3
Control Codes and Escape Sequences
Grouped by Function
Communications
Cancel Line CAN
Cancels all printable text in the current print line. Does not affect any control codes
or escape sequences.
Control code: CAN
Hexadecimal: 18
End of Text ETX
If "ETX/ACK: On" is specified in the "Setup: INTERFACE" menu, then receipt of an
ETX causes the printer to transmit an ACK to the host computer.
Since the ETX may be a legal value within an escape sequence, it is the user's
responsibility to ensure that an ETX used for data handshake is not sent within an
escape sequence. The user must also ensure that the maximum block size or the
number of blocks sent at one time does not exceed the input buffer size of the printer.
ETX/ACK handshake is available only with serial I/O. It is not available when using
the parallel interface or the coaxial/twinaxial interface.
If character set 2 is selected, ETX will be treated as a printable character instead of an
I/O handshake control code.
Control code: ETX
Hexadecimal: 03
Deselect Printer ESC Q n
Deselects the printer. Use of this command is discouraged, because the printer will
remain offline until an operator presses the ONLINE button on the control panel.
For a Proprinter II or Proprinter III, n should be 3. For a Proprinter XL or Proprinter
III XL, n should be 22. It does not really matter, because n will be ignored.
Example: The following escape sequence will force the printer offline.
Escape Sequence: ESC Q 22
Hexadecimal: 1B 51 16