Panasonic KXTG4321 - Manual (Page 41)

Useful Information
41 For assistance, please visit http://www.panasonic.com/help
5 Connect the telephone line cord.
Mount the unit by inserting the
mounting pins into the round
openings on the adaptor (for pin
2,
use the round cut out at the bottom
of the adaptor if you are using the 4
inch phone plate), then slide the unit
down to secure it. Connect the AC
adaptor to power outlet (page 10).
L
There are 2 common types of wall
phone plates. The distance
between
1 and 2 may vary
depending on the size of the wall
phone plate installed.
To remove the wall mounting adaptor
While pushing down the release levers
(
A), remove the adaptor (B).
Charger
1 Drive the screws (not included) into
the wall.
2 Mount the charger ( A), then slide it
down ( B) and to the right (C) until it
is secure.
83 mm
(3
1 /
4
inches)
or
102 mm
(4 inches)
(120 V AC,
60 Hz)
83 mm
(3
1 /
4
inches)
102 mm
(4 inches)
1
1
2
2
A
B
A
Available for:
KX-TG4322/KX-TG4323/
KX-TG4324
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
A
B
C
TG43xx_OI.book Page 41 Tuesday, December 11, 2007 2:04 PM