Pioneer BDP-LX52 User Manual
Page 37
37
En
06
Note
• Items that cannot be changed a
re indicated in gray. The items that can be selected depend on the player’s status.
• In O
ptions, the factory default settings are indicated in bold.
Setting
Options
Explanation
V
ide
o Ou
t
TV As
pect Ratio
16:9 (Widescreen)
Select this when connected to a wide (16:9) TV.
4:3 (Standa
rd)
Select this when connected to a conventional TV.
4:3 Video Out
Full
4:3
pictures are displayed over the entire screen.
No
rmal
4:3
pictures are displayed with vertical black bars along the sides. Select this
when you cannot switch the as
pect ratio to 4:3 on the TV.
4:3 Video Out is only valid when TV Aspect Ratio is set to16:9 (Widescreen).
DVD 16:9 Video Out
Letter Box
16:9
pictures are displayed with black bars at the top and bottom when
viewing on a 4:3 sc
reen.
Pan & Scan
The
picture is displayed over the entire screen, with the left and right sides of
the 16:9
picture cropped. Select this to view 4:3 pictures over the entire
sc
reen. For some discs, the picture will be displayed in the
Letter Box mode
even if
Pan & Scan is set.
•
DVD 16:9 Video Out is only valid when TV Aspect Ratio is set to 4:3 (Standard).
•
DVD 16:9 Video Out is only valid when playing 16:9 pictures of DVD-Video or DVD-R/-RW (VR format) discs. When other 16:9
pictures are played, they are output in the
Letter Box mode.
NTSC on PAL TV
On
Select this when connected to a PAL-only TV. The
picture is displayed
co
rrectly on the PAL-only TV even when playing a source with a frame/field
rate other than 50 Hz.
Off
Select this when connected to an NTSC-com
patible TV.
• The facto
ry default setting is
On for U.K. models, Off for other models.
• Many
recent PAL TVs support the input of NTSC signals, in which case this can be set to
Off. Also check your TV’s operating
inst
ructions.
A
u
di
o Ou
t
Dolby Digital Out
* Only valid fo
r the
DIGITAL
OUT terminal.
Dolby Digital 1
Dolby Digital audio signals a
re output. With BD-ROMs, the secondary audio
and inte
ractive audio are mixed for output.
Dolby Digital 2
Dolby Digital audio signals a
re output. With BD-ROMs, the signals are output
without mixing the seconda
ry audio and interactive audio signals.
Dolby Digital
PCM
Select this when the connected AV
receiver or amplifier, etc., is not
com
patible with Dolby Digital audio signals. The Dolby Digital audio signals
a
re converted into linear PCM audio signals for output.
DTS Out
* Only valid fo
r the
DIGITAL
OUT terminal.
DTS 1
DTS Digital Su
rround audio signals are output. With BD-ROMs, the
seconda
ry audio and interactive audio are mixed for output.
DTS 2
DTS Digital Su
rround audio signals are output. With BD-ROMs, the signals
a
re output without mixing the secondary audio and interactive audio signals.
DTS
PCM
Select this when the connected AV
receiver or amplifier, etc., is not
com
patible with DTS Digital Surround audio signals. The DTS Digital
Su
rround audio signals are converted into linear PCM audio signals for
out
put.
AAC Out
* Only valid fo
r the
DIGITAL
OUT terminal.
AAC
Select this when the connected AV
receiver or amplifier, etc., is compatible
with AAC audio signals. The AAC audio signals a
re output.
AAC
PCM
Select this when the connected AV
receiver or amplifier, etc., is not
com
patible with AAC audio signals. The AAC audio signals are converted into
linea
r PCM audio signals for output.
DTS Downmix
Stereo
DTS-HD Maste
r Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Su
rround audio signals converted to linear PCM audio signals
a
re converted into 2-channel (stereo) signals for output.
Lt/Rt
DTS-HD Maste
r Audio signals, DTS-HD High Resolution Audio signals or
DTS Digital Su
rround audio signals converted to linear PCM audio signals
a
re converted into 2-channel signals compatible with Dolby Surround for
out
put (when the connected AV receiver or amplifier, etc., is compatible with
Dolby P
ro Logic, the AV receiver or amplifier outputs the linear PCM audio
signals as su
rround audio signals).
LX52_VXJ5_IBD_EN.book 37 ページ ２００９年３月３日 火曜日 午後７時２９分