Pure Digital VX4600 - Manual (Page 53)

103
VX4600
102
VX4600
Alerts (Menu )
Allows you to set any of the four Alert options to
either On or Off.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds then press Alerts.
4. Select an alert option.
Service Change (Menu )
Alerts you when service changes. When you
enter a service area, the phone displays
Entering Service Area message. When you
leave a service area, the phone displays
Leaving Service Area message.
Minute Beep (Menu )
Alerts you 10 seconds before the end of
every minute during a call.
Call Connected (Menu )
Alerts you when the call is connected.
Back To Top (Menu )
Alerts you when you scroll through the end
of a menu list.
5. Select an option and press .
6. Set Off / On with then press .
Using Phone Menus Using Phone Menus
Volume (Menu )
Allows you to set various volume settings.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds then press Volume.
4. Select Ringer / Earpiece / Key Beep.
5. Adjust the volume of the ringer with
then press to save the setting.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by
the simultaneous transmission of two tones, one
from a group of low frequencies and another
from a group of high frequencies. Each group of
frequencies consists of four frequencies. Setting
the Key Beep length to Long will extend the
DTMF tone.
VX4600-(E) 111.QXD 04/1/27 10:29 AM Page 102