Electrical specifications, Especificaciones eléctricas – Professional Series PS75851 User Manual
Page 16

Problem
Solution
The appliance does not work
The appliance is equipped with a safety
system. It won’t work if the parts
have not been mounted properly. Check
whether the parts have been assembled
in the right way, but switch of
f the appli
ance before you do so.
The motor unit gives off an
unpleasant smell the first few
times the appliance is used.
This is
not unusual.If
the appliance
continues to
give of
f this
smell after
a
few times,
check the
quantities you
are
processing and the processing time.
The appliance
makes
a lot
of n
oise
, g
ive
s o
ff
an
unp
lea
-
san
t smell,
is too
hot to
touch,
gives of smoke etc.
Switch the
appliance of
f and
unplug
it.Turn
to the
nearest service
centre or
your dealer for assistance.
The filter is blocked.
Switch the
appliance of
f, clean
the
feeding tube
and the
filter and
process a
smaller quantity.
The filter
touches the
feeding
tube or
vibrates strongly
dur-
ing processing.
Switch the
appliance of
f and
unplug
it. Check
if the
filter has
been properly
placed in
the juice
collector.
The ribs
in the
bottom of
the filter
should fit
pro-
perly onto
the driving
shaft. Check
if the
filter is
damaged. Cracks,
crazes, a
loose grating
disc or
any other
irregula-
rity may cause malfunction.
Electrical Specifications
Electrical Ratings:
120V AC
60 Hz
700 Watts
Problema
Solución
Electrodoméstico no funciona El electrodoméstico cuenta con un
sistema de Seguridad. No funcionará si
las piezas no se han colocado adecuada
mente. Verifique si todas las piezas se
han colocado de la manera correcta,
desconectando el electrodoméstico antes
de hacerlo.
El motor emite un olor extraño Esto no es anormal. Si el electrodomésti
co durante las primeras veces continúa
emitiendo este olor después de
de uso algunas veces, verifique las
cantidades y el tiempo que se está utili
zando para procesar.
El filtro se encuentra obstruido Desconecte el electrodoméstico. Proce
da a limpiar el tubo de alimentación y el
fltro y procese utilizando cantidades
menores.
El filtro toca el tubo de
alimentación o vibra demasiado
durante el procesamiento
Apague el electrodoméstico y desen-
chúfelo.
Verifique que el filtro se haya colocado
adecuadamente dentro del recolector
para jugo. Las ranuras en la parte infe-
rior del filtro deben encajar adecuada-
mente sobre la base. Verifique que el
filtro no se encuentre dañado. Cualquier
rajadura o cualquier otra irregularidad
pueden causar desperfectos.
Especificaciones Eléctricas
Resistencia eléctrica
120V AC
60 Hz
700 Vatios